A soundbar can be a great tool for solving lots of different problems in your home theater. They look nice upgrading the aesthetic of your space, they reduce the number of cables you need to run saving you time and effort on the install, and, depending on the model, you get all these benefits as well as incredible sound quality. However, the way the soundbar connects to the Television itself can impact that sound quality.
You have several options for connecting your soundbar to your television, including:
- Digital Optical Audio (aka Toslink)
- HDMI ARC
- AUX (aka Auxiliary or 3.5mm)
But these methods aren’t created equally. They have different pros and cons, that you may prefer to use for different purposes. If you use your home theater to watch movies with the highest quality audio available, that may push you to do something different than if you’re just watching “normal” TV. To get the most out of your soundbar, be sure to read through the options below and choose what works best for you.
Digital Optical Audio (aka Toslink)
The most common audio connection method for modern soundbars is via a Digital Optical Audio Cable, although, we do have tutorials on specific devices like Echo Dots and soundbars. These are sometimes referred to as Toslink or SPDIF cables. They have a square-ish connect with a little circle in the middle, and they’re a little more rigid than other cables because they have a fiber-optic cable (read: glass) inside.
This is one of the easiest methods to connect your soundbar to your Television because it’s a single, slim cable that goes from one device to the other. There’s nothing to mess around with here, and that slim cable actually makes the cable management incredibly easy.
To connect your soundbar to your TV with the digital optical cable, simply find the ports on both devices, then make sure the soundbar is positioned where it should be relative to the TV. Check both connections: digital optical ables are designed to go in with a firm “click”, so make sure when you’re installing the cable you hear and feel the connectors click into place.
Then, you’re ready to use your optical cable to connect the devices and manage the cable. Because the cable is so light, it’s really easy to cool the extra cable up in a loose bundle and use a piece of tape to stick it to the back of the Television.
But be sure not to coil the cable too tight or try to make any sharp corners with it: that glass fiber can snap if you bend the cable too far. This is one of the cons of this method: the cable is rather fragile compared to other standards. But replacements like the KabelDirekt Optical Digital Audio Cable (on Amazon) are pretty reasonably priced.
Once you’re connected and both devices are on, try playing something. If the connection doesn’t “just work”, you may need to head to the setting out your Television and make sure it’s outputting sound to the digital optical connection. This may require you to find the Televisions internal speakers on the audio settings and set them to ‘OFF’, and if there are multiple output options you can select, look for ‘optical’ or ‘digital optical’, then select it.
HDMI (Connecting All Devices to the Soundbar)
First, let’s discuss what the difference between HDMI and HDMI ARC is. We have a more thorough article on HDMI ARC, but the quick and dirty of it is: HDMI ARC is a way to reduce the number of cables and remote controllers you need by allowing the Television and Soundbar to communicate with each other via a special Audio Return Channel (ARC).
This means that you can connect all of your video/audio sources to the Television directly, not the soundbar, and then connect only one cable from your Television to the soundbar. Once the Television and soundbar are connected via the HDMI.
But there are certainly cases where you don’t want to use an HDMI ARC connection, or you may simply have a Television or soundbar that isn’t equipped with an HDMI ARC port. This is not a huge problem: it just means that you need to connect all of your HDMI sources to the soundbar, using the soundbar as a receiver that can then pass the video “upstream” to the Television.
To connect your devices without using ARC, connect all of your video sources to the soundbar first, and then use the soundbar’s HDMI out port to connect it to the TV. This will ensure that the highest quality sound is getting to the soundbar, because if you hook the system up the other way, through the TV and then to the soundbar, the TV may do some audio processing on the audio signal.
Even if you do have HDMI ARC ports on both your Television and soundbar, you might want to connect your devices up this way to get the best sound quality. HDMI ARC is limited to 5.1 channel sound, and it can’t handle advanced audio standards like Dolby Atmos or DTS:X.
If you’ve got a top dollar unit like the Nakamichi Shockwafe Ultra (on Amazon), you’ll want to connect through non-ARC HDMI to get the best quality. (And be sure to check out our review on the Shockwafe Ultra if you’re interested in reading more about this unit.)
HDMI ARC (Connecting All Devices to the Television)
As described above, HDMI ARC is a great way to simplify your setup, although it does have some limitations around not supporting more than a 5.1 channel setup, and with no support for advanced audio standards like Dolby Atmos and DTS:X. There is a new standard on the horizon: HDMI eARC, which will support those 7.1+ channel setups and advanced formats (a little more on that here).
For the purposes of this discussion, though, HDMI Arc and HDMI eARC are interchangeable. If you do have more advanced equipment that has the eARC standard built-in, connecting your soundbar to your Television (and your computer – our guide) follows the same process as HDMI ARC.
First, locate the HDMI ARC port on your Television and Soundbar. These look just like HDMI ports, but they’ll be labeled with ‘ARC’, so you know that’s the one to use. Then, using an HDMI cable that’s been manufactured in the last year or so (supporting at least HDMI 1.4), simply connect the two devices.
The more complicated part is that all of your video sources need to be connected to the Televisions other HDMI-in ports as well, so you’ll need to connect those next and manage the cables however you see fit.
Then, you can turn everything on and test the connections. Although HDMI should be automatic, HDMI ARC may need to be activated in your Televisions settings. Head over to the audio settings menu and look for a control that’s called ‘HDMI Arc’ or ‘HDMI Control’, and then make sure that’s set to ‘on.’
Another option on the menu is to connect your soundbar to your Television (or Google Home Mini – our guide) using a Bluetooth connection.. This is certainly easier than the other options discussed from a cable management standpoint. It’s hard to beat wireless.
That said, the thing that makes Bluetooth appealing from a cable management standpoint also causes some reduced audio quality issues that you may not want to tolerate. Even the most advanced Bluetooth standards don’t support the information transfer rates available on cabled options, which means the highest number of channels you can hope to support is a whopping two.
That’s right, if you’re using Bluetooth you’ll be able to get a left and right channel, and a subwoofer. Your soundbar likely supports 2 channels of audio at a minimum. This isn’t automatically a problem, but if it’s an even slightly advanced unit with a center channel, like the Samsung HW-R60C 3.1 Channel Soundbar (on Amazon), then the Bluetooth connection may limit performance.
And there’s another worry here: that wireless signal is probably competing for spectrum space in your house, with phones and a wireless router and any number of smart home devices. The signal can easily be disrupted. This can cause intermittent drop-outs in the audio signal or reduced quality (popping or fuzziness), that you don’t really have any control over.
But, Bluetooth can be a good budget option, a sort of stepping-stone to making your setup functional while you plan the next upgrade. It’s a tool that’s handy to have in your toolbox, although it’s really there only to solve specific problems, not a solution for every setup.
AUX (aka Auxiliary or 3.5mm)
Auxiliary connections, also known as “AUX” or “3.5mm” connections, use the 3.5mm-to-3.5mm cables that you’re probably more used to seeing on the end of your headphones. Although Auxiliary cables offer the “one cable” simplicity of Auxiliary and HDMI ARC, they have all the limitations of Bluetooth.
Namely, you’ll be limited to 2 channels, so advanced multi-channel setups and subwoofers are out. What’s more, AUX is a physical format, not digital. All the other methods discussed in this article are digital (with the one asterisk that RCA can technically be physical or digital depending on the cables and setup).
That means that the Auxiliary cable can only transmit the physical sound signals of the left and right channels across its copper wires. No return channels like on HDMI ARC. No multiple channels at all like you get with HDMI and Optical. And no two-way communication which, technically, Bluetooth supports.
This can be a problem because the actual sound information being transmitted is of the lowest quality, with any extra information that might be paired on the digital format compressed so that the bare-bones physical signal is the only thing transmitted.
But maybe sound quality isn’t your goal here. Like Bluetooth, Auxiliary is a fantastic way to just get your setup up and running quickly while you plan your next move. It’s also a good option for mobile devices that don’t support Bluetooth, or when you want to connect to your mobile device directly to sidestep any wireless signal issues.
Again, Auxiliary is a good tool to have in your tool chest, but it isn’t the final solution for connecting to your Television. For anything multi-channel, or when quality matters, you’ll want to use one of the digital options described above.
RCA stands for Radio Corporation of America. This is an old standard, dating back to at least the 1940s, when RCA (the company) standardized this as a way to connect to audio devices like phonographs and radios.
If you want something higher quality, this is not the type of connection you’ll want to use. The RCA cables themselves can support a 2.1 channel setup, but the format is dated enough that it’s now getting somewhat obscure.
It would be surprising if your Television and soundbar both supported RCA, and even if they do the channel limitation likely means you’ll want to use something like Optical or HDMI to get higher quality signals from your Television to your soundbar.
But there are some other cases where RCA can make sense, like if you have an older Television and you don’t want to upgrade it right now. You can also get an RCA to Aux adapter like this Amazon Basics one (on Amazon), which will allow you to use the RCA ports on your soundbar to connect mobile devices that don’t support Bluetooth, or which you simply don’t want to use wirelessly.
RCA is an option, then, but it’s probably going to be your last resort. Higher-end soundbars may have the connections to accomplish an RCA connection just because they take an “everything and the kitchen sink” mentality, and some mid-range models have these connections because they know you might be using a more dated Television, but many premium soundbar options don’t bother including RCA jacks at all.
Using a Soundbar with a Receiver
So, now that you understand the various methods you may want to use toconnect your soundbardirectly to the audio source, there’s one more option you might be wondering about (in addition to setting up a microphone with it which we have a guide on). If you currently have an amplifier or a receiver, you may be wondering if you should connect your soundbar to your Television using that equipment.
Even if you don’t already have the equipment on hand, you may be wondering if adding an amplifier or receiver will increase the sound quality (it will – we’ve explained why before) We have another article talking in more detail about this, but the long and short of it is that you probably don’t want to be using an amplifier or receiver with your soundbar.
First, a setup with a receiver and a soundbar leads to added complexity, with more hardware and cables to manage that aren’t going to get you anything extra.
If you’re soundbar doesn’t have the available ports to support the level of audio quality you want, then adding a receiver is not going to get you there, because soundbars are not designed to work with receivers.
Instead, most soundbars act as the receiver themselves, replacing that piece of equipment. Some models even take that duty to the extreme, like the Nakamichi Shockwafe Ultra (on Amazon), which offers multi-channel speakers that have audio routed to them from the soundbar.
And in some cases, using an amp that drives signal to your soundbar can damage speaker equipment. This is because soundbars are typically doing the amplification on their end, so sending a signal to a receiver/amplifier and then the soundbar will result in the signal being amplified twice, which can damage your equipment.
As you can see, each of these options has different pros and cons, and should be used for different purposes. An optical cable might get you a high-quality signal across its fiber-optic cables and make installation simple.
But, HDMI Arc may offer features that you see value in, like reducing the number of remote controls you might need to juggle while using your system.
Bluetooth will add flexibility, and bring you closer to the dream of a cable-free setup, but at the cost of some signal quality issues and limited bandwidth that prevent you from using advanced audio standards like Dolby Atmos. And RCA may allow you to connect to more legacy Television models.
Be sure to choose the right method for your setup, that optimizes for your end goals. Home theaters can be expensive, confusing projects, but when it comes to soundbars the simplicity is a breath of fresh air. But you plan your setup and know what connection method you want from the start to get all the benefits a soundbar can offer.
Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV. Connect the other end to the TV OUT (ARC) port on your sound bar. Then, connect an optical audio cable from the TV's Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).How do I get my TV to recognize my soundbar? ›
- Prepare an HDMI cable.
- Connect the cable to the TV's HDMI IN (ARC).
- Connect to the HDMI OUT (TV-ARC) port of the soundbar.
- Turn on the soundbar and set the Source to D.IN.
- The TV sound will be played through your soundbar.
Conclusion. If you can, use HDMI ARC to connect your soundbar to your TV. That said, if you have an older device, you may need to use an optical connection instead. Fortunately, there isn't much difference in the audio quality between the two.What does ARC mean on a HDMI port? ›
HDMI-ARC (Audio Return Channel) can send and receive audio through a single HDMI cable. This means, you can have your Blu-ray players, set-top box, gaming consoles connected to your TV which will then channel all the audio outputs to the HDMI-ARC connected sound bar or home theatre system.Do you use HDMI in or out soundbar? ›
Use the HDMI cable or optical cable to connect the soundbar to your television. You connect the HDMI cable to the input that says eARC or ARC. On the soundbar, use the HDMI OUT connector.Do soundbars need HDMI and optical cable? ›
You'll get the best sound quality via an HDMI cable. Most soundbars and TVs have an HDMI port. Keep in mind you need to use an HDMI ARC or eARC cable and port. If you don't have this, you'll need an optical cable in addition to an HDMI cable.Why won't my TV recognize my soundbar? ›
1 First, make sure the HDMI cable is securely connected to the HDMI (ARC/eARC) port on the TV and the HDMI TO TV (eARC/ARC) port on the bottom of the soundbar. 2 Turn on the TV and soundbar. 3 Make sure HDMI-CEC is enabled on your TV. 4 Check if the TV's Sound Output is set to the connected soundbar.How many HDMI ports does a soundbar need? ›
For ARC and eARC connections, you can connect the soundbar to a TV with a single HDMI cable; otherwise, you'll just need to connect an optical audio cable in addition to an HDMI cable.How many channels do I need for soundbar? ›
Your soundbar will also be bigger the more channels it has. Generally speaking, most people will be fine with a soundbar between 2.0 and 2.1 channels and between 28 and 36 inches wide. Getting the right size is important to ensure that the soundbar you purchase will fit your media center.Why is my sound bar not working with optical cable? ›
The optical cable isn't securely connected. The optical cable may be faulty. Your TV isn't updated with the latest software version. The connected third-party sound bar, or home theater system may not be compatible with your TV.
Due to HDMI cable backward compatibility, almost any HDMI cable can be used for HDMI ARC. However, that doesn't mean you should use any old HDMI cable you have lying around. Since HDMI ARC was introduced with HDMI 1.4, your best bet is to use HDMI 1.4 cables or newer.Do you connect soundbar to HDMI in or out? ›
Use the HDMI cable or optical cable to connect the soundbar to your television. You connect the HDMI cable to the input that says eARC or ARC. On the soundbar, use the HDMI OUT connector.Why is my soundbar not working with my TV? ›
Check your cables to ensure they're in good condition, if not, replace the cables as needed. Reconnect the cables connecting your TV to your audio system making sure all cables are secure. Then turn on your TV, followed by your audio system. Refer to the connection options as needed.Why won't my TV play through my soundbar? ›
Double-Check Your Inputs and Cables
This may seem obvious, but make sure the volume is turned up and your soundbar is set to the correct input. If your TV is plugged into the soundbar's HDMI 1 port, make sure your soundbar is set to HDMI 1.
Most soundbars and TVs have an HDMI port. Keep in mind you need to use an HDMI ARC or eARC cable and port. If you don't have this, you'll need an optical cable in addition to an HDMI cable. With an HDMI 2.0b cable, you can transmit the sound of your television to your soundbar.