A simple fix for Hisense TV not turning on is to check the power source and ensure it’s functional. You can also check the power adapter and cords for damage and ensure they’re plugged in firmly.
Hisense is definitely a top pick if you’re looking for an affordable and high-quality TV. It ranked number 2 for TV shipments worldwide in 2022.
The first Hisense TV, known as the CJD18, was manufactured in 1978 and introduced the first 3D TV in 2013. Hisense has over 21000 granted patents, with 63% of them active.
The Hisense TV not turning on is a common issue that TV owners have to deal with from time to time. The good news is that it doesn’t mean that you have to replace the TV necessarily as there are simple troubleshooting that can be done.
Let’s find out!
How do I fix my Hisense TV when it doesn’t turn on?
Here are ways to fix your Hisense TV when it doesn’t turn on:
| Ways to Fix | Brief Explanation |
| Restart the TV. | Also known as a soft reset. Unplug the TV and wait for 60 seconds before plugging it back in. |
| Check the remote. | Replace the remote batteries and see if the TV turns on. Also, make sure the remote is not on Standby Mode. |
| Check the input source. | Press the Input source on your remote. Switch to the correct input. |
| Make sure cable connections are secured. | Check for damaged cables and make sure they’re attached firmly to the TV. |
| Make sure the wall outlet is working. | A faulty wall outlet could be the reason why the TV is not turning on. Use a different wall outlet. |
| Check the backlight. | Get a flashlight and point it to the TV screen. You’ll see the reflection of the flashlight if the backlight is in good condition. |
| Check the HDMI connections. | Unplug the HDMI and plug it back in again. Make sure they’re connected to the TV firmly. |
| Perform a factory reset. | Press the reset button on the back of the TV. If there is no reset button, press the input and volume down buttons simultaneously for 30 seconds. |
| Ensure the TV’s hardware are functional. | This is a tricky part as you might actually need to open the TV’s back panel. In that case, you should get a technician to do it. |
| Get in touch with Hisense support. | If nothing works, calling Hisense support is my suggestion. Check to see if the warranty covers fixing up your television. |
Why is my Hisense TV not turning on, but the red light is on?
If the Hisense TV isn’t turning on, but the red light is on, it could be an indication of a power supply problem or an issue with the motherboard or backlight.
If you notice the red light blinking, it’s usually an indication of a defective motherboard or backlight. When the backlight or motherboard is damaged, a black screen will appear.
However, if the red light isn’t flashing, it’s no issue as it means the unit is receiving enough power. Still, this will depend on the TV model that you have.
Another reason why the Hisense is not turning, but the red light is on could be due to the remote giving the TV the wrong signal. As a result, the TV won’t turn on.
In addition, it can be a problem with LED, which means that the TV is dying. At this point, you really have to consider getting a new TV.
How do I manually turn on my Hisense TV?
You can use the power button of the Hisense TV to turn it on manually.
All you have to do is plug in the TV to the wall outlet and press the power button. You’ll find the power button below the Hisense emblem or on the side of the TV, depending on the model.
For a quick demo, watch the video!
Is there a reset button on Hisense TV?
Yes, the Hisense TV has a reset button.
The reset button can be found at the back of the unit, depending on the model. You’ll be needing a small pin to poke the tiny hole to reset the Hisense TV.
If you want to reset your Hisense TV, follow these steps:
- Turn on the TV.
- Find the reset button on the back of the TV.
- Press and hold the reset button for about 20 seconds. Keep pressing until the TV restarts.
- The TV will revert to factory settings.
Can Hisense TV be repaired?
Yes, the Hisense TV can be repaired depending on the severity of the damage.
Depending on the warranty coverage, you’ll be able to get your broken Hisense TV replaced or repaired due to a factory defect.
Generally speaking, it would cost you at least $200 to repair a smart TV screen, depending on your location. If the cost of repairing your Hisense is more than the figure I just mentioned, I suggest getting a new one for practical reasons.
Still, it’s worth sending a Hisense TV to a repair shop. However, I strongly suggest getting a quotation beforehand.
What is the most common problem with Hisense TV?
Aside from the Hisense TV not turning on, here are other common issues you might face:
- flickering screen
- brightness – too high or too low
- blinking LED indicator
- black screen
- volume issues
- turns off suddenly
- WiFi connectivity issues
How do you fix a TV that won’t turn on after a power outage?
A power drain should fix a TV that won’t turn on after a power outage.
Sometimes a charge is left on your TV after a power outage. This is also known as “flea power.” A power drain is necessary to drain and reset the charge on your TV.
Here’s how to power cycle drain your TV:
- Unplug the TV.
- Press and hold the power button for 30 seconds.
- Turn on the TV. If it doesn’t turn on, repeat steps 1 and 2.
FAQs
Q: What are the available screen sizes for Hisense TVs?
A: Hisense TVs come in various screen sizes, ranging from small-sized models around 32 inches to large-sized models above 75 inches.
Q: Does my Hisense TV support 4K resolution?
A: Many modern Hisense TVs support 4K resolution, providing a high-definition viewing experience.
Q: How can I update the software on my Hisense TV?
A: You can update the software on your Hisense TV by going to the settings menu and selecting “System Update.” Follow the on-screen instructions to download and install the latest updates if available.
Q: Can I use streaming apps like Netflix and YouTube on my Hisense TV?
A: Yes, Hisense smart TVs usually support popular streaming apps like Netflix, YouTube, Hulu, and more. You can download them from the app store or use pre-installed apps.
Q: Does my Hisense TV support HDR (High Dynamic Range) content?
A: Many recent Hisense TV models support HDR, which enhances the contrast and color range, providing more vibrant and lifelike visuals.
Q: What are the available ports and connections on my Hisense TV?
A: The available ports may vary based on the model, but common ports include HDMI, USB, Ethernet, RF input, AV input, and optical audio output.
Q: How do I adjust the picture settings on my Hisense TV?
A: You can adjust the picture settings by accessing the “Picture” or “Display” menu from the settings. Here, you can modify brightness, contrast, color, and other display settings.
Q: Can I use my smartphone as a remote control for my Hisense TV?
A: Yes, you can use the Hisense RemoteNOW app on your smartphone to control your Hisense TV over Wi-Fi.
Conclusion
To solve the issue of Hisense TV not turning on, you must learn how to diagnose it firsthand to perform the right troubleshooting procedure. This includes checking connections such as power cables and HDMI, checking remote batteries, as well as the TV’s hardware.
If you have performed pretty much everything and nothing worked, calling Hisense support is the next best step. You might be able to have your Hisense TV replaced or repaired depending on the warranty.
For other troubleshooting hacks for Hisense TVs, check out this article.
Other Articles
- Wyze Error Code 90 (8 Working Solutions)
- Is a Home Theatre Power Manager Really Necessary? (Find Out!)
- How Much Is Alexa at Walmart? (Revealed)
- Firestick Won’t Turn On (A Step-By-Step Guide)
